THE CORDLESS COLLECTION

No, you will only need one battery to get you started! All products in the KitchenAid Go™ range have an interchangeable 10.8V battery that can be used across the range for uninterrupted making.

This is applicable across:

• KitchenAid Go™ Hand Mixer
• KitchenAid Go™ Hand Blender
• KitchenAid Go™ Food Chopper
• KitchenAid Go™ Blade Grinder
• KitchenAid Go™ Personal Blender
• KitchenAid Go™ Kitchen Vacuum

See below for LED indicator status:

• 4 Lights: 75-100%
• 3 Lights: 50-75%
• 2 Lights: 25-50%
• 1 Light: < 25%

When the Battery is installed or when the appliance is operated, the Battery charge status LEDs will display for 5 seconds and then turn off. If the Battery charge is 10% or less, the indicator light will continue to flash until the unit is no longer in use or Battery is removed.

USING THE USB CABLE

1. Attach the USB cable to the adapter. Connect the other end of the USB cable to the Battery.
2. Plug the adapter into a power source.

USING THE DOCKING STATION (OPTIONAL)

1. Attach the USB cord to the adapter.
2. Plug the adapter into a power source.
3. Turn the Battery upside down and slide the Battery onto the dock.
4. Press down and the latch will snap into place.
5. Upon initial plugging in the Battery into the charger, the Battery LEDs will alternate for a few seconds as it performs a self-diagnostic of the Battery status.
6. After diagnostic is complete, the Battery will begin charging with a single LED flashing.
   LEDs will become solid in color as charging progresses. Battery is fully charged when all LEDs are solid.

Note: The battery is supplied partially charged. To ensure full battery capacity, fully charge the battery before using the product for the first time.The lithium-ion battery can be charged at any time without reducing its service life. Interrupting the charging process does not damage the battery.

Yes, however appliances should not be used in rain or wet conditions and in general exposed to rain. Store indoors.